EU-106 Ultrasonic Flow Transmitter|Battery Power Supply Flow Measurement Meter

                  A. YITE  TECHNOLOGY  GROUP







EU-106 Smart Ultrasonic Flow Transmitter

EU-106 Ultrasonic Flow Transmitter is a fixed mounted flow meter, can work alone without a LCD and Keypad,and can modify the parameters from the Remote Unit, with better accuracy and stability. Their electronic enclosures are rated as IP68, so this products could be installed below the water, then there will be no limited for the installed place. The power could be Li-battery, fit for the environment without power supply.

The ultrasonic flow meter works with Ultrasonic Technology and Measures by Principle of time difference. There is a pair of ultrasonic vibrator and receiver in the exterior of pipe emitting in two directions and both face to face. The light vibrator will emit ultrasonic signals down stream and reversed stream. Measuring the time difference of the two directions transmission, you will get the flow rate of the fluid; then input the diameter of pipe, you will get the flow.

Ultrasonic Flow Measurement TransmitterUltrasonic Flow Measurement Meter battery power supplyUltrasonic Flow Transmitter

Part of Transducer:

Smart Ultrasonic Flow Measurement TransmitterUltrasonic Flow Measurement TransducerHigh Temperature Ultrasonic Flow Measurement TransmitterUltrasonic Flow Measurement Monitor Meter






Normally +/-1.5% of reading at rates>0.2mps

Response Time

0-999 seconds, user-configurable

Pipe Size

1/2" ~ 240" (DN15mm - DN6,000mm)*

Pipe Material

All metals, most plastics, lined pipes


English (U.S.) or metric

Liquid Types

Virtually all liquids and liquids with minor solids (<10,000ppm). Full pipes

Digital Interface

Relay/OCT/RS-485/4~20mA/ 0~20mA output.

Power Supply

220V AC /  24VDC / Li-battery

Download the catalogue of EU-106 smart ultrasonic flow transmitter meter       





New Products

Contact Us