Pressure & Differential Pressure

  • GE-512 D-P Switches
GE-512 D-P Switches

GE-512 D-P Switches

  • Type: GE-512

  • Brass Shell, 1/4 SAE

  • Micro Differential Pressure Range

  • CE Certificate
  • Product description: Fixed Setpoint, Low Cost, the setpoint could not be changed, This Differential Pressure Switch is very useful for heat exchanger to monitor the water flow.
  • ISO9001 ISO14001 ISO45001 CE ATEX




The GE-512 Differential Pressure Switch is a new type pressure and flow monitor switch, when the water flow (differential pressure) in system rises up or falls down to one set value, it will output a warning or sent switch-off signal to automatic control system. And it could also be used to indicate the status of pump or water filter.

It could avoid the shortcomings of annual inspection or changing target flow switch for water chiller unit so it could be applied widely in the water protection, status feedback of pump and by-pass control of differential pressure in evaporator and condenser in medium and large sized water chiller unit.


Specification:
* Protection Grade IP54
* Media Temperature -20~93 C
* Environmental Temperature -20~71 C
* Output 5A; 125/250V AC
* Max Static Pressure 16 Bar (30bar could be custom-made)
* Metering Substances Gas, Water (If special substances, please declare)
* Cable 1.5m, 2x0.5mm2

* Main Materials Brass or Stainless Steel

SAE port of differential pressure switch

Type Number with DP setpoint:
* GE-512008  8Kpa
* GE-512012  12Kpa
* GE-512016  16Kpa
* GE-512020  20Kpa
* GE-512024  24Kpa
* GE-512028  28Kpa
* GE-512032  32Kpa
* GE-512036  36Kpa




CONTACT US

Contact: Alvin

Tel: 400-1199-703

Email: sales@ayite.net

Add: No.116-122, KWOK SHUI ROAD, Kwai Chung Industry Center, HongKong