Flow Switch

  • Thermal Flow Switch
Thermal Flow Switch

Thermal Flow Switch

  • Type: GE-324

  • Shell: Stainless Steel 304

  • Max Pressure: 100bar

  • DPDT switch signal is available
  • Product description: GE-324 Thermal Flow Monitor Switch is used to measure and monitor the liquid flow state, with LED to display the flow condition and sent alarm signal. The flow set point is adjustable by the user dire
  • ISO9001 ISO14001 ISO45001 CE ATEX




This Thermal Flow Switch is used to measure and monitor the liquid flow state, with LED to display the flow condition and sent alarm signal. The flow set point is adjustable by the user directly, No pressure loss, and stabitly with sensitive performance. It have a stainless shell, could work the the anti explosion proof environment. DPDT switch signal is available
 

1. Work Voltage: 24VDC
2. Max Pressure: 10 Mpa or More
3. Flow Media: Water, Oil, Air, or Gas
4. Pipe Size: DN10~DN3000
5. Working Temperature: -20C ~ 70C
6. Output: standard Replay SPDT; 3 wire NPN; 3 wire PNP; ,4~20mA
7. Connection: BSP1/2", NPT1/2, NPT3/4, or others
8. Protect Grade: IP67
9. Probe Material:standard 304, 316 Titanium or PTFE is available

clamp type flow switch

[Clamp Mounting Flow Switches]


The flow switches feature thermal dispersion technology in which the temperature difference is greatest in a no-flow condition and decreases as flow increases, cooling the heated RTD. Changes in flow velocity directly affect the extent to which heat dissipates and, in turn, the magnitude of the temperature difference between the RTDs.

An electronic control circuit converts the RTD temperature difference into a DC voltage signal. Both of these signals are provided at output terminals and are used to drive two adjustable-setpoint alarm circuits. Both alarms are independently field configurable for flow, liquid level/interface or temperature operation.

CONTACT US

Contact: Alvin

Tel: 400-1199-703

Email: sales@ayite.net

Add: No.116-122, KWOK SHUI ROAD, Kwai Chung Industry Center, HongKong