Fixed Ultrasonic Flowmeter
- Type: EU-108
- CE certificate
- Calibrate report with each unit
- ATEX Explosion Proof Type is available
- Product description: Wall Mount Ultrasonic Flow Meter is separated with the transducer. Their electronic enclosures are rated as IP65 (NEMA 4X), ATEX type is available
ISO9001 ISO14001 ISO45001 CE ATEX
EU-108 Ultrasonic Flow Meter is a fixed mounted flow meter, the flowmeter is separated with the transducer. Their electronic enclosures are rated as IP65 (NEMA 4X), so this products could be installed for both indoor and outdoor, then there will be no limited for the installed place. It could measure the temperature, work as Calorie Meter too. CE certificate.
The ultrasonic flow meter works with Ultrasonic Technology and Measures by Principle of time difference. There is a pair of ultrasonic vibrator and receiver in the exterior of pipe emitting in two directions and both face to face. The light vibrator will emit ultrasonic signals down stream and reversed stream. Measuring the time difference of the two directions transmission, you will get the flow rate of the fluid; then input the diameter of pipe, you will get the flow.
* Linearity 0.5%
* Repeatability 0.1%
* Accuracy Normally +/-0.5~1.0% of reading at rates>0.2mps
* Response Time 0-999 seconds, user-configurable
* Pipe Size 1/2" ~ 240" (DN15mm - DN6,000mm)*
* Pipe Material All metals, most plastics, lined pipes
* Units English (U.S.) or metric
* Liquid Types Virtually all liquids and liquids with minor solids (<10,000ppm). Full pipes
* Digital Interface: Relay/OCT/RS-485/4~20mA/ 0~20mA output.
* Power Supply: 220V AC / 24VDC / 85~264VAC